English 
Deutsch Who this German-taught B.Eng. suits – and what you need to get in
This part-time, online-enabled Bachelor in Mechanical Engineering – Technical Revision is a fit if you plan to study in German while keeping work or family commitments. Typical candidates include: junior technicians moving towards mechanical engineering roles who need a structured, accredited degree; skilled workers or military-trained specialists aiming to convert hands-on expertise into a university qualification; and international high-school graduates seeking a cost-efficient route into Germany’s engineering sector from a Berlin-based university.
Admission requirements
To enrol, you need a recognised university entrance qualification and sufficient German for academic study. In brief:
- Higher education entrance: a secondary school leaving certificate that qualifies you for university studies (equivalent to the German Abitur) for a 180-ECTS Bachelor of Engineering.
- Admission with international diplomas: international school certificates and prior studies are accepted if they are formally recognised as comparable to a German university entrance qualification. Certified translations may be required where documents are not in German or English.
- Teaching language: German. You must provide formal proof of German language proficiency suitable for studying and taking exams in German. The university specifies accepted certificates during application.
- Study format: offered in a part-time format with online components; the programme is based in Berlin. Scheduled teaching times may include evenings and selected Saturdays.
- No numerus clausus (NC) indicated for this programme; places are limited by capacity.
- Accreditation: programme accredited (valid until 31 October 2030); degree awarded is a state-recognised Bachelor of Engineering (180 ECTS).
Personal requirements
Success in a part-time, largely online study path depends on your ability to organise yourself across time zones and commitments. Plan realistically for 15–25 hours per week including live sessions, self-study, assignments and exam prep. You should be comfortable learning technical content in German, reading standards and documentation, and communicating in teams. Strong habits in self-organisation, perseverance over 8 semesters, and steady weekly progress matter more than prior perfection in every maths or physics topic.
Be prepared for fixed-time classes in the evening (Central European Time) and occasional Saturday sessions; ensure a quiet workspace, reliable internet and a computer suitable for CAD/engineering software used in coursework. If you are applying from abroad, make sure your German is good enough for lab instructions, safety-related content and technical reports; if in doubt, take time to close language gaps before the first exam phase. A practical mindset, curiosity about how machines and systems are designed, and readiness to revisit fundamentals (mathematics, mechanics, materials) will help you stay on track throughout the programme.
What will you study in the Mechanical Engineering - Technical Revision at bbw Hochschule?
This programme is taught in German. You will need strong German language skills proven by a recognised certificate to follow lectures, pass assessments and work with technical standards. The degree awards 180 ECTS over eight semesters and is offered by bbw Hochschule, a private Fachhochschule (university of applied sciences) that is staatlich anerkannt (state-recognised).
You build a rigorous engineering foundation first. Typical subjects include Engineering Mathematics and Physics, Technical Mechanics (statics, strength of materials), and Thermodynamics/Fluid Mechanics to understand forces, energy and flow in real components.
You then move into design and production. Expect modules such as CAD and Engineering Drawing, Materials Science and Testing, and Manufacturing Processes. These give you the tools to design parts, choose materials and understand how production affects quality and safety.
The specialisation in Technical Revision focuses on inspection, compliance and quality. You cover Quality Management and Standards (ISO, DIN), Non-Destructive Testing methods (e.g. visual, ultrasonic) and Technical Documentation. The goal is to plan, execute and review technical inspections and audits safely and traceably.
Safety, law and systems thinking are another pillar. You work with Product Safety and Liability, Risk and Failure Analysis (FMEA, fault trees) and Plant/Asset Management to ensure machinery and installations meet legal and normative requirements throughout their life cycle.
Engineering management and digital tools round off your profile. Examples include Project Management, Measurement and Data Acquisition, and Reliability and Maintenance strategies to connect shop-floor data with decision-making in inspections and audits.
As is standard at a university of applied sciences, bbw Hochschule emphasises practical application: case studies, lab work where applicable, and projects that mirror industry tasks. You complete the programme with a Bachelor’s thesis that documents an independent engineering project in the field of technical revision. The university is staatlich anerkannt (state-recognised), so the degree is legally equivalent to public-university awards in Germany.
How does studying in the Mechanical Engineering - Technical Revision work?
Teaching language and what proof you need
All teaching, materials and exams are in German. International applicants must be able to study and work with German technical terminology. Admission normally requires proof of advanced German via a recognised certificate; without this, progressing through the curriculum and passing exams is not realistic.
Part-time study based in Berlin with online elements
The programme runs part-time over 8 semesters in Berlin. bbw Hochschule’s berufsbegleitend (part-time alongside work) format combines evening classes during the week with sessions on alternate Saturdays. The university integrates online teaching elements to reduce commuting and support flexibility; on-site presence in Berlin is still part of the study experience.
Learning format, group sizes and personal support
As a university of applied sciences, teaching is practice-oriented with seminars rather than mass lectures. You study in comparatively small groups, which enables structured feedback, supervision in labs/project work and approachable teaching staff. Expect guided exercises, case work and project-based learning aligned to inspection and quality tasks.
What to expect in exams and assessments
Assessment typically includes written exams in fundamentals, graded exercises, project reports, presentations and documentation tasks linked to inspection and quality management. The Bachelor’s thesis in the final stage demonstrates your ability to solve a defined engineering problem and document it according to professional standards.
Enrolment as an international student
This is a German-taught, Berlin-based part-time degree. If you are applying from abroad, plan sufficient time to assemble academic and language documentation and to organise your stay in Germany. Formal steps for non-EU citizens (such as residence and financing requirements) depend on your personal situation and the study format.
What does the Mechanical Engineering - Technical Revision cost?
Tuition is structured as monthly instalments of €368 per month over the standard duration, which sums to €17,640 in total for eight semesters (180 ECTS). Private universities in Germany commonly charge tuition monthly; this helps spread costs over the study period. Learning materials and equipment for coursework (e.g. software, calculator, protective gear for labs where applicable) are personal expenses you should budget for.
Living costs in Berlin vary by district and lifestyle. As an orientation for a student budget: plan roughly €1,000–€1,400 per month for rent (in shared accommodation), food, health insurance, public transport and incidentals. Because this is a part-time format with evening and Saturday classes plus online elements, some students continue working in Berlin to finance living costs; whether this is feasible for you depends on your job and residence status.
What careers and recognition does the Mechanical Engineering - Technical Revision offer?
bbw Hochschule is a private, state-recognised Fachhochschule (university of applied sciences). The B.Eng. Mechanical Engineering – Technical Revision is formally accredited (2022–2030) and awards 180 ECTS within the Bologna framework. For you, that means the degree is legally equivalent in Germany to public-university B.Eng. awards and is internationally readable thanks to ECTS and diploma supplement.
Technical revision is about keeping products and installations compliant, safe and reliable. Graduates work in areas such as:
- Inspection and conformity assessment of machines, pressure equipment and plant components
- Quality assurance, supplier auditing and process capability in manufacturing and assembly
- Maintenance and reliability engineering for production facilities, utilities and infrastructure
- Product safety, standards and regulatory compliance (ISO/DIN), technical documentation
- Non-destructive testing (NDT) coordination and technical auditing in sectors like rail, energy, automotive or machinery
In Germany and the EU, roles span engineering SMEs, large manufacturers, notified bodies, technical service providers and operators of plants and infrastructure. Entry salaries depend on sector and location; inspection and quality roles in Berlin/Brandenburg typically sit in the same range as other junior mechanical engineering positions, with progression linked to responsibility for audits, NDT levels and regulatory scope.
Who is the Mechanical Engineering - Technical Revision right for – and who not?
This degree suits German-speaking applicants who want to qualify for technically responsible roles that centre on inspection, quality, safety and compliance—often alongside employment. The part-time, practice-oriented model helps you translate new methods directly into your job.
- You have solid German and want to study in German to work in the DACH/EU engineering market.
- You prefer a part-time, applied university of applied sciences programme with evening and Saturday classes.
- Your career goal is technical inspection, quality management, maintenance or product safety.
- You live in or near Berlin—or plan to move there—and value smaller cohorts and close contact with lecturers.
There are also clear situations where this programme is not a good fit. Considering these early avoids costly missteps.
- You need an English-taught programme. This degree is delivered entirely in German.
- You cannot attend in Berlin or on scheduled evenings and alternate Saturdays; a fully online or purely asynchronous format is not offered.
- You are looking for a low-fee public university option; as a private university, tuition applies and is higher than at public institutions.
- You want a dual study contract with employer-paid tuition; this track is part-time, not dual with integrated employment from the university side.
Advisory Service
Have questions about Academic Programs Mechanical Engineering - Technical Revision? Ask your question here, even anonymously. An employee of the institution bbw Hochschule or the editorial team will answer you.